Bosch CM8S Miter Saw Manual

The Bosch CM8S is a versatile 8-inch miter saw designed for precision cutting in a variety of materials. It features a powerful motor, a compact design for easy portability, and an adjustable miter and bevel for enhanced cutting versatility. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 8-inch saw blade, adjustable miter and bevel angles, laser guide for precision cuts, and a dust collection system.

Feature	Description
8-inch saw blade	For precise cutting of various materials
Adjustable miter angles	Allows for angled cuts up to 52 degrees
Bevel adjustment	Offers bevel cuts up to 47 degrees
Laser guide	Helps in aligning cuts accurately
Dust collection	Minimizes debris for a cleaner workspace

Installation

Unpack and inspect the saw. Place it on a stable surface.

Attach the saw to a workbench or stand for stability.
Ensure the power cord is properly connected to a power source.
Check the blade for proper installation and alignment.

WARNING! Always ensure the saw is unplugged when making adjustments.

First-Time Setup

Power on the saw; follow the setup instructions.

Adjust the miter and bevel settings as needed.
Test the laser guide for accuracy.
Perform a test cut on scrap material.

CAUTION! Always wear safety goggles when operating the saw.

Specifications

Blade Size: 8 inches.
Motor Power: 15 amps.
Miter Angles: 0 to 52 degrees left and right.
Bevel Angles: 0 to 47 degrees.
Weight: 37 pounds.
Dust Collection: Integrated dust bag.

Controls and Settings

Access the miter and bevel adjustments on the saw's front panel. The laser guide can be activated via a switch located on the side.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental start.

Connecting Devices

Ensure the saw is unplugged before connecting any accessories.

Attach the dust collection system if needed.
Connect any additional accessories as per the manual.

Tip: Always refer to the manual for specific accessory compatibility.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as required.
Place the material securely against the fence.
Power on the saw and make the cut.
Always wait for the blade to stop before removing the material.

WARNING! Keep hands away from the blade during operation.

Safety Features

The Bosch CM8S includes several safety features such as a blade guard, electric brake, and a safety switch to prevent accidental activation.

Care & Maintenance

Unplug the saw before performing any maintenance. Regularly clean the saw and check for any wear on the blade.

CAUTION! Do not use solvents or harsh chemicals for cleaning.

Regulatory Information

This product complies with all applicable safety standards. For support, visit www.boschtools.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade does not spin	Power issue	Check power connection and switch.
Laser guide not visible	Battery issue	Replace battery in laser guide.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose components	Tighten all screws and bolts.

Reset: If issues persist, refer to the manual for reset instructions.

Service: For service inquiries, contact Bosch customer support.