Bosch Dual Bevel Sliding Miter Saw Manual

The Bosch Dual Bevel Sliding Miter Saw is designed for precision cutting and versatility. It features a powerful motor, dual bevel capability, and a large cutting capacity, making it ideal for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual bevel capability, sliding arm for wider cuts, laser guide for precision, and adjustable miter settings.

Feature	Description
Dual Bevel	Allows for bevel cuts in both directions without repositioning the workpiece.
Sliding Arm	Increases cutting capacity for wider materials.
Laser Guide	Helps ensure accurate cuts by projecting a line onto the workpiece.
Miter Settings	Adjustable settings for precise angle cuts.
Dust Collection	Integrated dust bag for cleaner workspace.

Installation

Unpack and inspect contents. Place the saw on a stable work surface.

Attach the saw to a workbench or stand for stability.
Ensure the saw is level and secure before use.
Connect to a power source following the manufacturer's guidelines.

WARNING! Ensure all safety measures are followed during installation.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the miter and bevel settings to the desired angles.
Test the laser guide alignment before making cuts.
Familiarize yourself with the controls and safety features.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

Motor Power: 15 Amp.
Blade Diameter: 12 inches.
Bevel Capacity: Dual bevel up to 45 degrees.
Miter Capacity: 0 to 52 degrees left and right.
Cutting Capacity: 14 inches at 90 degrees.
Weight: 60 lbs.
Dust Collection: 90% efficiency with included dust bag.

Controls and Settings

Access the miter and bevel controls located on the front of the saw. The laser guide can be activated via a switch on the side panel.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is unplugged before making any adjustments or connections.

Connect the saw to a power outlet that meets the voltage requirements.
Use appropriate extension cords if necessary, ensuring they are rated for the saw's power.

Tip: Always check the power source before connecting the saw.

Operating the Saw

Follow the operating instructions for making cuts.

Adjust the miter and bevel settings as needed.
Position the workpiece securely against the fence.
Engage the safety switch and power on the saw.
Make the cut, ensuring hands are clear of the blade.

WARNING! Always keep hands away from the blade while operating.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the blade clean and sharp.
Check and empty the dust bag regularly.
Inspect electrical cords for damage.

CAUTION! Unplug the saw before performing maintenance.

Safety Information

Always follow safety guidelines when operating the saw.

Wear safety goggles and hearing protection.
Keep the work area clean and well-lit.
Do not operate the saw with loose clothing or jewelry.

Regulatory Information

This saw complies with applicable safety standards and regulations. For support, visit www.boschtools.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Laser not working	Battery issue	Replace battery or check connections.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Reset: Refer to the manual for reset instructions if applicable.

Service: For service inquiries, contact Bosch customer support.